The Woods Equipment BB840XDW Brushbull Single Spindle slasher is a medium duty single spindle slasher. It has a 2.1m (7’) cut and has a 75mm cutting capacity. The gearbox horsepower is 120hp. This model comes standard with dual wheels.
|Tractor Horsepower (hp)||40 - 120hp|
|Gearbox Horsepower (hp)||120hp|
|Category||Medium Duty - Dual Wheels|
|Cutting Width||2.13m (7ft)|
|'Quick Change' Blade Pins|
|Contour Frame Design|
|Clevis Hitch Points||Heavy duty clevis hitch; Category 1 or 2, 3-point hitch|
|Structural Tubes||Two 75mm x 100mm full length structural tubes – exclusive feature|
|Tube Bumper / Rear Frame||50mm round tube bumper/rear frame – exclusive feature|
|Skid Steers||Bolt on full length side skids|
|Slip Clutch Protection||Driveline with slip clutch protection|
|Deck Side Depth||Deck depth 212mm|
|Access Window||Access window on top of deck for easy blade change – exclusive feature|
|Blade Size||12.7mm x 101.6mm|
|Tail Wheel||4 point mounted tail wheel. 125mm x 400mm laminated tail wheel with 360 degree rotation|
|Front & Read Chain Shielding|
|Warranty||5 year limited gearbox warranty and 3 year deck rust through warranty|
The BrushBull Series (BB Series) are the largest single spindle slashers in the Woods product range. All sizes of BB slashers come in a standard duty option, medium duty option and an extra heavy duty option. The cutting capacity of the Brushbull series ranges from 50mm in diameter to 100mm diameter. The cutting capacity ranges from 5’ to 7’ and suits tractors with a hp range between 30hp and 250hp.
Woods equipment is built in the United States of America with American steel. All parts are available in Australia. Woods slashers come with the longest warranty in the industry, including a five year warranty on the gear box and a three year rust through warranty on the deck.
All BB Series single spindle slashers are built on a complete subframe using two 75mm x 100mm full length structural tubes, with a 50mm heavy duty tube around the back of the slasher. This feature allows the integrity of the slasher deck to be maintained throughout use. The slashers are built with a contour frame to allow the water and debris from slashing to flow off the deck. This helps protect the top of the slasher from rust. Underneath the slasher the blades are attached to a stump jumping disk. This protects the carrier, unlike other slashers which are designed with cutting beams.
Woods slashers are the safest slasher on the market, as the operator does not need to get under the unit to change the blades. All slashers are designed with a large access window on the top of the slasher deck which allows for easy access to the blades and stump jump disc. This exclusive feature exceeds all safety standards in Australia and is an asset to any owner.
Another exclusive feature is the blade pins and the exclusive “Quick Change” blade pin system. The blade pins are 38mm (1.5”) instead of the standard 19mm bolt on most other slashers. The Quick Change pin system allows the blades to be changed with light hand spanners in a very short period of time. The exclusive design of the blade pins means they do not need to be removed with an oxy, grinder or rattle gun.
Woods Slashers are the only slasher on the market that do not leave a windrow during the operation. The exclusive rounded back design spreads the cut material evenly across the cutting surface.
Woods slashers come with a heavy duty clevis hitch. The gear boxes are genuine Woods built gearboxes. Woods slashers are renound for fast cutting speeds, up to 16,900fpm on some models. When you purchase a Woods slasher, the specified size is the full cutting width. For example, a 5’ slasher is 5’ cut, not a 4’10” like other brands.
All models come with a tail wheel. The tail wheel frames are four point mounted an most slashers come with a wider tail and wheel (5.25”) than other brands on the market. The tail wheels on the 100 and 1000 Series are designed with a cast housing and taper roller bearings. The tail wheels on a 10 series is a 4” wide wheel with a bushed axle.